HomeproductstutorialsfaqsMediaContact

INSTALLATIONTUTORIALS

 

All installation tutorials require Adobe Acrobat Reader V5.0 or higher. The latest version of Adobe Acrobat reader can be downloaded HERE.

 

Attention:

These tutorials are designed specifically for our pre-programmed microcontrollers. Using something other than one of our microcontrollers will result in a mod that does not work.

 

 

Installation is done at your own risk. I will not be held responsible for any damage to yourself, your controller, your Xbox 360 console or any other equipment.

 

 

 

Xbox 360 Button Rapid Fire mod kit for wired and wireless controllers

For Xbox 360 wired and wireless controllers. We have released a new versions of this mod chip. This is an 8-pin chips with simplified installation. The chip acts as the previous versions where you only need to touch the new button and the controller acts as if you are rapidly tapping the left or right triggers. This chip work for almost any first person shooter that uses the triggers for firing. This mod will allow you to fire a weapon as fast as the game will allow.  So fast it is like pressing the trigger 24 times per second but all you need to do is hold the new button.

 

For Installation of the rapid fire for both the left and right side please follow the "dual button rapid fire" tutorial below. For Installation of only the right side please follow the "single button rapid fire tutorial".

 

Dual Button Rapid Fire Tutorial (4.5MB)

 

Single Button Rapid Fire Tutorial (5.8MB)

 

 

 

Xbox 360 Trigger Rapid Fire mod kit for wired and wireless controllers

This new chip allows you to use the triggers for the rapid fire. The buttons you will install change the trigger from normal to rapid fire. This is excellent for those who want the same feel of using the trigger to fire. This chip work for almost any first person shooter that uses the trigger for firing. This mod will allow you to fire a weapon as fast as the game will allow.  So fast it is like pressing the trigger 24 times per second but all you need to do is hold the trigger down.

 

For Installation of the rapid fire for both the left and right side please follow the "dual button rapid fire" tutorial below. For Installation of only the right side please follow the "single button rapid fire tutorial".

 

Dual Trigger Rapid Fire Tutorial (4.5MB)

 

Single Trigger Rapid Fire Tutorial (5.1MB)

 

 

 

Xbox 360 3-Mode Rapid Fire mod kit for wired and wireless controllers

This new chip allows you to have two different speeds of rapid fire along with a burst fire mode on your controller. This chips uses the trigger for firing and the button you install changes the mode of the trigger between fast, slow and burst fire modes as well as turn off the rapid fire so the trigger acts normal again. This chips also allows for use of the player 4 LED to show which status of rapid fire oyu are in by flashing fast, slow or staying on solid for the burst fire mode.

 

 3-Mode Rapid/Burst Fire Tutorial (5.9MB)

 

 

 

______________________________________________________________________________________________

 

 

 

 

PS3 Sixaxis and Dualshock 3 Rapid Fire mod kit

For Playstation 3 sixaxis and dualshock 3 controllers. This mod allows you to touch one button and the controller acts as if you are rapidly tapping the R1 button. This works for almost any first person shooter that uses R1 for firing. This mod will allow you to fire a weapon as fast as the game will allow.  So fast it is like pressing R1 20 times per second.

 

We have updated this chip to allow of a slightly simplified install follow the correct tutorial based on the date of your purchase. You can also tell when you kit arrives that it is the new version because there will be no resistors in the kit.

 

 

For Kits purchased on or after July 22nd 2008

*NEW* PS3 sixaxis and dual shock 3 (4.1MB)

 

 

For kits purchased before July 22nd 2008

PS3 sixaxis and dual shock 3 (4.7MB)

 

 

 

______________________________________________________________________________________________

 

 

 

 

Halo 2 Doubleshot/BXRR controller mod kit for Xbox 360

Our first and still very popular mod, With this kit you will receive all of the parts you need to perform this installation on a xbox 360 wired or wireless controller.

 

Wired Controller Tutorial (6MB)

Wireless Controller Tutorial (7MB)

 

 

 

Halo 2 Doubleshot/BXRR controller mod kit for the Original Xbox

Our first and still very popular mod, With this kit you will receive all of the parts you need to perform this installation on a original xbox controller-S. This tutorial does not cover the original Duke controller and some older variations of the controller-S

 

Controller-S Tutorial (5MB)